Pen Holder

Pen Holder

Pen Holder In The News

Seven Simple Steps To Make A Pen Holder Using Old Floppy Discs

You’re able to recycle your old floppy discs by developing pen cases using them. To make this happen, you must acquire the supplies as well as instruments required, drill slots into 4 floppy disks, punch two slots in the one remaining floppy disc, arrange the very first 4 disks in a row, hook up the discs by using the zip ties, build a box by just folding the sides, and fix the bottom.

Classic floppy discs may be a trouble to dispose of. Luckily, there are numerous recycling projects which make use of your classic floppy disks and one of them could be to build floppy disk holders for your pens. This specific job is fairly easy to make and is also beneficial to those who appreciate computers and also recycling. The pen case would also enable you to manage your own pens. Study these simple steps to make your own pencil case using outdated floppy disks:

Obtain the items and tools required

Ensure you obtain the following equipment and materials needed for the project: 5 floppy disks that are 3 ½ by five inches in size, sixteen zip ties, a portion of outdated scrap wood, a drill with a size 5/32 drill bit, as well as a pair of scissors.

Punch slots into four floppy disks

Choose 4 floppy disks and punch 4 holes into every disc. Make sure to position the old piece of wood on your worktop or perhaps table so that you will not destroy it in the drilling process. The top two openings need be on the upper area of the discs on each side of the steel sliders about one inch under the dent. The bottom part openings need to be drilled on the edges about a half-inch from the lower part of the disk.

Punch two openings on the remaining floppy disc

For the 5th and last floppy disc, punch holes on each of the corner of the disk. This specific disc will perform as the bottom of the pen holder. Don’t do something to this particular floppy disk till it’s the period to attach the bottom.

Arrange the very first 4 disks in a row

Take the four discs you recently drilled and position them next to each other to develop a row. The steel sliders need to be placed at the top for all 4 disks.

Link the discs by using the zip ties

You will now have to slip the zip ties into the openings and place the four disks together. This particular step can cause a straight line composed of the four discs. Make sure you pull the zip ties properly so that they will be held together safely.

Structure a box by folding the ends

Now you may shape a box simply by folding the ends around. The last 2 ends should be hooked up together utilizing zip ties. Pull firmly to keep them in place.

Connect the bottom

Once you’ve produced a box, turn it upside down. The part with the steel sliders will now be on the table. The fifth floppy disk can be connected. Install it on the bottom of the box and then attach it to the sides using the zip ties stowed via the openings. Use the scissors to cut off the ends of the zip ties.

In addition to finding uses for old items that you would otherwise discard, recycling projects can be your own way of preserving the environment.

Written by Daina W. Morrison.

Questions about Pen Holder

Pen Holder Videos

penholder

It has never been easier to shop for Pen Holder.

Other articles you might like;

• First Grade

Incoming search terms:

• how to make pen holder for clipboards
• make pen holder for laptop sleeve

Before You Continue, Check Out This HOT OFFER...

Make REAL Money In The Next 24 Hours - Click Here!

Related posts:

1. Metal Pencil
2. Silver Dollar
3. Color Princess
4. Color Wipe
5. Full Color